at least front brakes. The Wilwood 7/8" Master Cylinder for the clutch arrived today. It is now installed with the Tilton pedal assembly, the brake master cylinders, residual pressure valves and the front brake lines. It appeared to bleed nicely, which means that the hydraulic lines have no high and low spots which would allow air to collect and not bleed out properly.
The plan for tomorrow is to complete the rear brake plumbing and install the drive by wire throttle linkage.
With the introduction of vacuum boosters the braking systems the accuracy of the brakes have increased upto a remarkable level. So plan replacing your old braking system with new one.
ReplyDeleteThanks
Henry Jordan
Hydraulic Seal Kits